E-Link Interface Converter
Specification

E1 Link Port DTE
  • Interfaces: G.703 75 Ohm unbalanced (2 x BNC Connectors to PD7024) G.703 120 Ohm balanced (RJ45 to CTR12/CTR13)
  • Compliance: G.703, G.704, G.736, G.823, PD7024, CTR12, EN41003, EN60950, EN50082-1, BABT, CE(EMC,LVD,TTE)
  • Data Rates: 2048kb/s ±50ppm (The unit will automatically operate as a clock master if no clock is registered on the Rx input. If data is sensed it will function as a slave.)
  • Line Code: HDB3
  • Range: 0-2.6km (using .6mm/22AWG twisted pair cable)
  • Optional DC PSU
Data Channel DCE
  • Interfaces: X.21/V.11 or V35
  • Connector: DB15F
  • Data Rates: G.703: 0-2048Kbps, G.704: 0 – 1984kb/s (both in N x 64kb/s steps)
  • Control Signals: Indicate signal may be switch-selected to affirmed/disaffirmed, or to follow DTE control signal C
  • Diagnostics: Local and remote loopbacks
  • Data Format: Synchronous transparent
General
  • Front Panel Indicators: Power, Carrier, Error and Loop LEDs, N x 64kb/s Rate (Digital)
  • Enclosure: Plastic desktop box
  • Dimensions: 140mm x 110mm x 40mm
  • Weight: Less than 0.5Kg including power supply
  • Environment: Operating 0-40°C, 0-90% humidity
  • Power Supply: 100 - 240 VAC, 50 - 60Hz
Ethernet port (E-Link 2 only)
  • Data Rate: 10Mbps full-duplex operationl)
  • Compliance: IEEE 802.3 industry standard
  • Connectors: 10Base-T RJ45 socket
  • Buffering: Transmit: 8 x 256-byte buffers. Receive: 120 x 256-byte buffers
  • Protocols: ARP, ICMP, IP,TCP, UDP, SNMP (MIB-II)


For further information please contact us